The honeycomb ceramic substrate is fully reacted with sufficient catalyst for higher efficiency and green emissions. The rare metals (Pt, Pd, Rh) make the conversion effect of the catalytic converter strong, bringing your vehicle's exhaust emissions up to standard emissions. The heavy-duty stainless steel material is highly resistant to corrosion, enhancing vehicle performance and improving service life. Vibration damping layer & Protective pads. The vibration damping layer acts as sealing, insulating and securing the carriers, it also prevent damage to the carrier caused by vibration, heat distortion, etc.
Robot automatic production line, accurate hole alignment, perfect fit the original vehicle. Professional assembly racks & fixtures, ensure a 360-degree fit and a 100% match to the original fittings. Fitment: For Ford E-350, For Ford E-450. Installation: Bolt-on & Flange to Flange.
For Ford E-350, For Ford E-450. Restricted States: California, New York, Colorado & Maine. FIVE CHECKS BEFORE REPLACING A CATALYTIC CONVERTER. Retrieve / repair all PCM trouble codes, check for any available TSBs or PCM re-flash updates. Make sure vehicle is in proper fuel control. Always check for internal coolant leaks and excessive oil consumption. Make sure you have the right part for the application. WHY A CATALYTIC CONVERTER FAILS.Converters don't fail on their own; failure is usually a symptom of a larger problem. This is why it is important to identify the root cause of the failure and perform the repair prior to installing a new converter. Most catalytic converter failures fall under one of three categories. Overheated, melted or broken converters.
Universal fit catalytic converters have a customizable design with expandable bushings to adapt to connector pipes based on the repair. They may require specialized fabrication and welding for installation. Pre-bent routings hangers and flanges for OE-style direct-fit catalytic converters attach to the exhaust system for a direct-fit bolt-off, bolt-on solution.No matter what you select, all converters must meet the emission requirements of the vehicle and cannot be chosen by size alone. WHAT TO DO IF CHECK ENGINE LIGHT COMES ON? Troubleshoot an illuminated check engine light by making sure the gas and oil caps are on tight and that the oil dipstick is seated correctly. If the light remains lit, it could be triggered by a faulty oxygen sensor, failing catalytic converter, bad spark plugs, malfunctioning thermostat or bad mass air flow sensor.
If the light remains on, make sure to make an appointment with your service provider as soon as possible. In those states, you must install a CARB-compliant catalytic converter on CARB emissions certified vehicles in the states of California and Colorado, on all vehicles. CARB-compliant converters contain more catalyst material in order to converter emissions more efficiently and comply with stricter emissions reduction requirements. Check the vehicle's emissions control information label and consult your state's aftermarket converter regulations to select the right catalytic converter.
Due to New York state emissions regulations, this item cannot be installed on vehicles equipped with California emissions standards in New York. All emissions information for a vehicle can be found on a tag under the hood. If the label is missing, you can contact a dealership with your VIN to determine which emissions system is equipped for your vehicle. Professional installation is highly recommended to ensure that the product can exert its maximum effect after proper installation. Please look at your converter before ordering and make sure this is the correct one. If you're in search of the perfect catalytic converter to optimize your vehicle's performance while promoting a cleaner environment, you've come to the right place. At Antiqua Autoparts, we pride ourselves on being more than just a marketplace - we're a catalyst for positive change in the automotive industry. Please DO NOT fill in the PO Box address. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage.Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing.
Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. Tough Equipment & Tools, Pay Less. At Antiqua Autoparts, we envision a future where clean and efficient vehicles are the norm. Upgrade your vehicle's catalytic converter with us, and together, we'll drive change, one exhaust at a time. Catalytic Converter for For Ford E-350, For Ford E-450. Due to increased Emissions Standards, this item is NOT certified for sale In California, New York, Colorado and Maine.California Prop 65 Warning: Cancer and/or reproductive harm. Please read proposition 65 Warning. Product Dimensions (L x W x H): See Instructions.
23.4 lbs/10.6 kg. 21.6 lbs/9.8 kg. 12.3 lbs/5.6 kg. 19.4 lbs/8.8 kg. FIVE CHECKS BEFORE REPLACING A CATALYTIC CONVERTER 1.Retrieve / repair all PCM trouble codes, check for any available TSBs or PCM re-flash updates 2. Repair all exhaust leaks 3. Make sure vehicle is in proper fuel control 4. Always check for internal coolant leaks and excessive oil consumption 5. WHY A CATALYTIC CONVERTER FAILS: Converters don't fail on their own; failure is usually a symptom of a larger problem.
Most catalytic converter failures fall under one of three categories: 1. Overheated, melted or broken converters 2. UNIVERSAL CONVERTERS: -Universal fit catalytic converters have a customizable design with expandable bushings to adapt to connector pipes based on the repair. They may require specialized fabrication and welding for installation.Pre-bent routings hangers and flanges for OE-style direct-fit catalytic converters attach to the exhaust system for a direct-fit bolt-off, bolt-on solution. No matter what you select, all converters must meet the emission requirements of the vehicle and cannot be chosen by size alone.
Troubleshoot an illuminated check engine light by making sure the gas and oil caps are on tight and that the oil dipstick is seated correctly. If the light remains lit, it could be triggered by a faulty oxygen sensor, failing catalytic converter, bad spark plugs, malfunctioning thermostat or bad mass air flow sensor. If the light remains on, make sure to make an appointment with your service provider as soon as possible. 2, In those states, you must install a CARB-compliant catalytic converter on CARB emissions certified vehicles in the states of California and Colorado, on all vehicles. 3, CARB-compliant converters contain more catalyst material in order to converter emissions more efficiently and comply with stricter emissions reduction requirements.
4, Check the vehicle's emissions control information label and consult your state's aftermarket converter regulations to select the right catalytic converter.. CA & NJ & GA WAREHOUSE. California Warehouse: City of Industry, CA. All emails will be responded to within 12-24 hours.