NEW Body Cab Mount Bushing Kit for 08-16 Ford F250 F350 Super Duty 2/4WD BLACK

  

NEW Body Cab Mount Bushing Kit for 08-16 Ford F250 F350 Super Duty 2/4WD BLACK. NEW Body Cab Mount Bushing Kit for. Ford F250 F350 Super Duty 2/4WD BLACK. Functional & Practical - Replace the deteriorated and worn-out OEM rubber body mount bushings, sleeves and hardware, fixing the body mount issue and reducing equipment wear, vibration and noise. Perfect Fitment - For Ford F250 F350 Super Duty 2008 2009 2010 2011 2012 2013 2014 2015 2016 2WD/4WD.

Outstanding Performance - Provide necessary rigidity, yet have ample resilience to keep everything quiet. Premium Material - The bushings are made from high quality polyurethane and constructed with a slick black finish, anti corrosion and resistant to vehicle fluids and road grime. Also includes zinc plated steel sleeves and hardware in package. For Ford F250 Super Duty 2WD - 2008 thru 4WD - 2016 For Ford F350 Super Duty 2WD - 2008 thru 4WD - 2016. Features: (1) Replace the deteriorated and worn-out OEM rubber body mount bushings, sleeves and hardware, fixing the body mount issue and reducing equipment wear, vibration and noise.

(2) Provide necessary rigidity, yet have ample resilience to keep everything quiet. (3) The bushings are made from high quality polyurethane and constructed with a slick black finish, anti corrosion and resistant to vehicle fluids and road grime. All POSITONS - Remove the bolts from the passenger side body mounts and loosen the driver's side body mount bolts, but do not remove them.

POSITION 1 - On the front radiator support bolts, you will need to remove the upper nut on the inside of the radiator support and then you can loosen the lower bolt. A 24 extension with a universal swivel and an 18mm socket works well for this on most trucks. You might need to have someone hold the mounts with large adjustable pliers while you loosen the bolts.

On some models, the front bumper must be removed to access the bolts. Using a floor jack, carefully place the jack on the passenger side floorboard support mounts and lift high enough to remove the body mounts.

Make sure the cab is securely supported with jack stands before working under the truck or removing anymounts. ALL POSITIONS - Remove and replace the passenger side body mounts one at a time. Take care not to mix up the pieces. The upper and lower mounts are clipped together on the frame and you may have to use a pair of large screwdrivers to pry the mounts off.

ALL POSITIONS - Install kit body mounts on kit steel mounts, Assemble the kit components. ALL POSITIONS - When installing the new assemblies onto the frame, make sure they are seated into the frame and centered in the hole. POSITION 1 - Install kit body mount M04060-02 on the top, and kit body mount M04060-01 along with kit washer S10126 on the bottom.

Run the bolt in from the bottom and start it but don't tighten it yet. Start the upper nut on the radiator support but don't tighten it yet.

POSITIONS 2, 3, & 4 - Working on one position at a time, install kit body mount M04060-02 on the large kit steel top half and kit body mount M04060-01 on the small kit steel bottom half. Start the bolts but do not tighten. Repeat steps 1 through 10 for the driver's side. Tighten all bolts in an alternating cross pattern (as with tightening wheel lug nuts) until you can feel the stock metal shells seat together around 45-55 ft. Tighten the top nut on the radiator core support mount last.

Reinstall the body cab plugs, and if removed, reinstall the seat, trim, and upholstery. Reinstall the airbag fuse and reconnect the battery. Package included: Full set Body Mount Bushing Kit. Precision-engineered to be a direct replacement for factory rubber mounts.

Used to attach a body and frame, and replace the vulnerable rubber body mounts which can become deformed with excessive wear and exposure to the elements. You can replace the hardware along with the bushings all with one kit and upgrade the longevity of your body to frame alignment. Best choice of auto parts. Constructed from a special polyurethane blend, which is strength and no-deformation, Impact resistance and for years to use. Help to protect your body to frame attachment and your smooth ride.

Also includes OE-style replacement steel sleeves and hardware. MO-Auto body mounts can resistance to vehicle fluids and road grime. They outlast factory body mounts and provide more positive attachment to the frame.

If you are not satisfied with our products. If you cannot get your order on time. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. We will respond within 24hours. Thank you for your understanding.

We stand behind every product we sell. We define the item as defective only if it doesn't function as described. FEEDBACK IS VERY IMPORTANT TO US.