T3/T4 Turbo Charger. 57 A/R Turbine. 50 A/R Compressor 400+ HP Boost Stage III

  

50 A/R Compressor 400+ HP Boost Stage III. 50 A/R Compressor T04E Turbocharger Stage III.

This T3/T4 hybrid turbocharger assembly is created by installing a T4 compressor wheel and housing onto a T3 turbine housing, wheel and center section. A T3/T4 hybrid turbocharger assembly is a compromise for engines where a T3 turbocharger is too small to reach the desired maximum horsepower but using a T4 turbocharger would create an unacceptable amount of turbo lag. The T3/T4 turbocharger is designed to be used on engines displacing 1.6L-2.5L and is typically good for around 400HP. They are also commonly used in twin turbo applications.

In this case those figures would be doubled 3.2L-5.0L engines up to 800HP. Horsepower ratings are generally meant to express the turbochargers maximum airflow capability. Recommended boost pressures are 5psi. 5 Bar to 20psi(1.5 Bar) and boost pressures should not exceed 30psi(2 Bar). Exceeding 20psi(1.5 Bar) of boost pressure can significantly reduce a turbochargers lifespan. Generally speaking 14psi(1 Bar) is good for a 100% increase in horsepower from a naturally aspirated engine. Also factory non-turbo engines without forged internal components on high octane pump gas (91-92 octane) it is not recommended exceeding 7psi.

Doing so could result in damaging your engine. Capable of Boosting Horse Power up to 300+ BHP. High Quality Material, Cast Housing with Durable Steel. Intake Inlet & Outlet: 3" & 2".

Hardware as Shown in the Picture Above. No Installation Guides Are Included, We Highly Recommend To Seek Professional Installation. Buyers outside of the U. Please check with your country's government website. Tracking numbers are available as soon as they are created and processed.

Please note that we are not responsible for any kind of delay if P. Box address or any other undeliverable addresses were provided. We do not offer local pick-ups. Replacements will not be sent until the claim is approved. Instructions are not included unless stated in the description.

It is highly recommended to seek professional installation as we are retailers of the parts and not trained technicians. We can provide minimal support, but do our best to support our customers.

NOTE: All of universal and turbo parts may require slight modification in order to fits perfectly. Most aftermarket items are produced for off-road and/or show purpose only. These items are not suitable for regular driving. User must follow the directions given and any misuse of this product is at his/her own risk. The manufacturers, distributors, and retailers will not be held responsible for using this item other than specified above. The item "T3/T4 Turbo Charger. 50 A/R Compressor 400+ HP Boost Stage III" is in sale since Friday, January 17, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts". The seller is "ajpdistributors" and is located in La Puente, California.

This item can be shipped worldwide.

1. Installation Guide: Not Included; Professional installation is highly recommended
2. Intake Inlet / Outlet: 3" / 2"
3. Brand Type: Aftermarket Branded
4. Compressor Trim: 44
5. Placement on Vehicle: Front
6. Compressor Inducer / Exducer (mm): 50.50 / 76.00
7. Specifics: Additional Items / Modification REQUIRED to Install
8. Exhaust Downpipe Flange: Standard T3 5-Bolt
9. Turbine Trim: 73
10. Turbine A/R: 0.57
11. Compressor A/R: 0.5
12. Notes: Car Compatibility Chart For Search Purposes Only
13. Other Part Number: Racing Track Drag Oil Cooled T3/T3 Race Replacement Upgrade JDM
14. Warranty: Yes
15. Fitment Type: Performance/Custom
16. Manufacturer Part Number: TBC-12131-451-L2
17. Quantity: 1 X T04E Turbocharger
18. Material: Cast Iron / Steel Turbo Housing / Aluminum Controller
19. Brand: AJP Distributors
20. Type: Turbo Charger
21. Turbine Inducer / Exducer (mm): 65.50 / 55.90
22. Interchange Part Number: High Boost Performance Turbine Turbo Turbocharger Charger HP Gain
23. Exhaust Turbo Manifold Flange: Standard T3/ T4 4-Bolt
24. Fitment: Universal T3/T4 Manifold