This barrel is to be fitted to any government sized slide that accepts a bull barrel in the calibers listed below. A government sized barrel is a 5 barrel. 355 and can be reamed for any chamber supporting a, 355 caliber bullet (9mm, 9x21, 9x23, 38 Super 38 Super comp, 9X25 Dillon, 357 Sig, 9X40).
The one piece design means you won't have to screw on the compensator nor worry about it coming loose. Minimum Recoil & Muzzle Flip; Superb Accuracy. Non-threaded compensator, matched combo effectively controls muzzle flip from high pressure ammunition while adding match-grade accuracy.
First chamber has a 15° forward wall to increase lockup time. 932 wide comp provides clean, precise fitting to slide. Stainless steel, button rifled, bull barrel machined from a billet forging, then air gaged to ensure exact bore size and finish. Eliminates the barrel bushing for increased lockup area and improved accuracy.
Fully ramped with Wilson/Nowlin style ramp for reliable feeding. Extra material at feed ramp, hood, locking lugs and muzzle allow precise fitting.
Supplied with a generic, short chamber which can be opened up to accept any of the popular, pistol cartridges. STI barrels are made from 416 rifle grade stainless steel billet forgings. The bore is gun drilled, button rifled, then air gauged to offer the most exacting size and finish to make this the most consistent barrel available. The rifling is 1 in 16 twist and has six lands and grooves.The barrels are vacuum heat treated and vacuumed tempered to 40Rc, then machined to exacting specifications. The barrels are short chambered to allow gunsmiths to cut the chamber to their application. Barrels are supplied with a generic short chamber which can be opened up to accept any of the popular pistol cartridges. Fully ramped with Wilson/Nowlin-style ramp for reliable feeding. THIS IS FOR A 1911 STYLE FRAME WITH Wilson Nowlin Style Ramp - MAKE OR MODEL DOESN'T MATTER.
All of the parts we receive are factory original parts. For example we might have parts marked Colt, Springfield, Smith & Wesson, Remington, Lone Wolf, FN, Sig Sauer, CZ, Springfield, etc. Or, we might receive the parts before the stamp is applied.
Most of our parts are excess inventory that these companies overproduced because they overestimated how many guns they would sell. For example, we might have them make a barrel longer with porting, or apply a different colored finish, or custom cut a slide for a better appearance, etc. In any case, our parts are all top notch parts that you would expect to get in a brand new gun.The nature of this business model has plusses and minuses. The plusses are you get top quality original parts for less than you would pay otherwise. Obtaining most of our products is hit and miss. Some items are produced enough that we can get more relatively easily, but others depend on if there was overstock accidentally produced.
SALES TO UNITED STATES ONLY. It is the purchaser's responsibility to make certain that all part(s) are correctly fitted & installed. The purchaser and the installer of parts must accept FULL responsibility for the correct adjustment and functioning of the firearm after such installation.
Improper fitting of any parts could result in malfunctioning, damage to the firearm, or serious injury or death to the shooter, and/or other persons. All firearms parts should be inspected and installed by a competent gunsmith.
The seller is "spectresupply2" and is located in this country: US. This item can be shipped to United States.